Select And Start A Washing Programme - Electrolux ESL 68071 Benutzerinformation

SELECT AND START A WASHING PROGRAMME

Starting the washing programme
without delay start
1. Activate the appliance.
2. Set the washing programme and func-
tions.
3. Press the OK /Start button.
4. Close the appliance door. The washing
programme starts automatically.
Starting the washing programme with
delay start
Set the delay start before you set a
washing programme.
1. Activate the appliance.
2. Open the menu option and go to DE-
LAY START .
3. Set the number of hours for the delay
start.
4. Press the OK /Start button.
5. Press the Option button to close the
menu option.
6. Set the washing programme.
7. Close the appliance door. The count-
down of the delay start starts automati-
cally.
• When the countdown of the delay
start is completed, the washing pro-
gramme starts automatically.
The opening of the appliance door inter-
rupts the countdown of the delay start.
When you close the door, the count-
down continues from the point of inter-
ruption.
Cancelling the delay start
If the delay start has not started, you can
change the selection.
To change the selection while the delay
start operates, it is necessary to cancel the
delay start. When you cancel a delay start,
this automatically cancels the washing pro-
gramme.
1. Press and hold the Option button and
the OK /Start button at the same time.
2. Release the buttons when the display
shows the message CONFIRM CAN-
CEL ? .
3. Press the OK /Start button to confirm.
• Delay start and washing programme
are cancelled. The display shows the
message CHOOSE PROGRAMME .
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
Cancelling the washing programme
If the washing programme has not started,
you can change the selection.
To change the selection while the washing
programme operates, it is necessary to can-
cel the programme.
1. Press and hold the Option button and
the OK /Start button at the same time.
2. Release the buttons when the display
shows the message CONFIRM CAN-
CEL ? .
3. Press the OK /Start button to confirm.
Make sure that there is detergent in the de-
tergent dispenser before you start a new
washing programme.
End of the washing programme
When the washing programme is comple-
ted, an intermittent acoustic signal sounds.
1. Open the appliance door.
• The display shows the message PRO-
GRAMME END and the message
PLEASE SWITCH OFF . (If the salt con-
tainer and/or the rinse aid dispenser
are empty, the salt and/or rinse aid
messages replace the message
PLEASE SWITCH OFF ).
2. Deactivate the appliance.
3. For better drying results, keep the appli-
ance door ajar for some minutes.
Remove the items from the baskets
• Let the dishes become cold before you re-
move them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower bas-
ket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless steel
becomes cool more quickly than the
dishes.
electrolux 11