Herunterladen Inhalt Inhalt Diese Seite drucken

Select And Start A Washing Programme - Electrolux GA60GLI220 Benutzerinformation

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

66 electrolux
To engage the holders and the support,
do these steps:
1. Push the support to the front part of the
basket to engage it.

SELECT AND START A WASHING PROGRAMME

Starting the washing programme
without delay start
You can set the washing programme
with the appliance door open or
closed.
If the door is open, you can change the
setting, the appliance starts to operate
only after you close the door.
If the door is closed, the appliance
starts to operate after 3 seconds from
the setting of the washing programme.
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. Set the washing programme.
• The related washing programme
number flashes in the display.
• The phase indicators of the set wash-
ing programme come on.
3. If necessary, set one or more functions.
4. Close the appliance door, the washing
programme starts automatically.
• The display shows the programme
time.
• The phase indicators go off but the in-
dicator of the phase in operation
stays on.
Starting the washing programme with
delay start
You can set the delay start with the ap-
pliance door open or closed.
2. Engage the holders on the support.
If the door is open, you can change the
setting because the appliance starts to
operate only after you close the door.
If the door is closed, the appliance
starts to operate after 3 seconds from
the setting of the delay start.
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. Set the washing programme.
3. Press the delay start button again and
again until the display shows the time of
the delay start.
• The delay time flashes in the display.
4. Close the appliance door, the count-
down starts automatically.
• The delay time flashes no more in the
display.
• The phase indicators of the set wash-
ing programme go off.
When the countdown is completed, the
washing programme starts automatically.
The indicator of the phase in operation
comes on.
The opening of the appliance door
stops the countdown. When you close
the door, the countdown continues
from the point of interruption.
Cancelling the delay start
The countdown is not operating
1. Press the delay start button again and
again until the display shows the num-
ber of the washing programme.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis