Setting The Water Softener; Use Of Dishwasher Salt - Electrolux ESL 68071 Benutzerinformation

8 electrolux

SETTING THE WATER SOFTENER

The water softener removes minerals and
salts from the water supply. These minerals
and salts can cause damage to the appli-
ance.
German degrees
(°dH)
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener man-
ually and electronically.
Manual adjustment
Turn the water hardness dial to the position
1 or 2 (refer to the table).

USE OF DISHWASHER SALT

Filling the salt container
1. Turn the cap counterclockwise and
open the salt container.
2. Fill the salt container with 1 litre of water
(only for the first time you fill with salt).
3. Use the funnel to fill the salt container
with salt.
Water hardness
French degrees
(TH°)
91 - 125
76 - 90
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
< 7
Adjust the level of the water softener if this
does not agree with the water hardness in
your area.
Contact your local water authority to know
the water hardness in your area.
mmol/l Clarke de-
grees
9,1 - 12,5 64 - 88
7,6 - 9,0 53 - 63
6,5 - 7,5 46 - 52
5,1 - 6,4 36 - 45
4,0 - 5,0 28 - 35
3,3 - 3,9 23 - 27
2,6 - 3,2 18 - 22
1,9 - 2,5 13 - 17
0,7 - 1,8 5 - 12
< 0,7 < 5
Electronic adjustment
1. Open the menu option.
2. Go to SETTINGS .
3. Press the OK /Start button to open the
submenu.
4. Go to WATER HARDNESS .
5. Press the OK /Start button.
6. Set the level of the water softener.
7. Press the OK /Start button.
8. Press the Option button to close the
menu option.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
When it is necessary to fill the salt contain-
er, the display shows the message REFILL
Water hardness ad-
justment
manually elec-
troni-
cally
1) 10
2
1)
9
2
1)
8
2
1)
7
2
1)
6
2
1) 1)
2 5
1 4
1 3
1 2
2) 2)
1 1