Multitab Function; Loading Cutlery And Dishes - Electrolux ESL 68071 Benutzerinformation

10 electrolux
Adjust the rinse aid dosage
Factory set: position 3.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).

MULTITAB FUNCTION

The multitab function is for combi detergent
tablets.
These tablets contain agents as detergent,
rinse aid and dishwasher salt. Some types
of tablets can contain other agents.
Be sure that these tablets are applicable for
the water hardness in your area (refer to the
instructions on the packaging of the prod-
ucts).
The multitab function deactivates the flow
of rinse aid and salt.
The multitab function deactivates the salt
and the rinse aid messages.
The programme duration can increase if
you use the multitab function.
Activate or deactivate the multitab func-
tion before the start of a washing pro-
gramme. You cannot activate or deacti-
vate the function when a washing pro-
gramme operates.
To activate the multitab function
1. Open the menu option.
2. Go to MULTITAB and activate the multi-
tab function.

LOADING CUTLERY AND DISHES

Refer to the leaflet 'Examples of Real-
Life loads'.
Hints and tips
• Do not put in the appliance items that
can absorb water (sponges, household
cloths).
• Remove the remaining food from the
items.
• Make soft the remaining burned food on
the items.
• Put hollow items (cups, glasses and
pans) with the opening down.
• Make sure that water does not collect in
containers or in bowls.
Turn the rinse aid selector
decrease the dosage.
• When you activate the multitab func-
tion, it stays on until you deactivate it.
3. Press the OK /Start button.
4. Press the Option button to close the
menu option.
To deactivate the multitab function and
use separately detergent, salt and rinse
aid
1. Open the menu option.
2. Go to MULTITAB and deactivate the mul-
titab function.
3. Press the OK /Start button.
4. Press the Option button to close the
menu option.
5. Fill the salt container and the rinse aid
dispenser.
6. Adjust the water hardness to the highest
level.
7. Start a washing programme without
dishes.
8. When the washing programme is com-
pleted, adjust the water softener to the
water hardness in your area.
9. Adjust the quantity of rinse aid.
• Make sure that cutlery and dishes do not
bond together.
• Make sure that the glasses do not touch
other glasses.
• Put small items in the cutlery basket.
• Mix the spoons with other cutlery to pre-
vent them to bond together.
• When you put the items in the baskets,
make sure that the water can touch all sur-
faces.
• Put light items in the upper basket. Make
sure that the items do not move.
• Water droplets can collect on plastic
items and non-stick pans.
4
to increase or