IGNIS ADL 456/1 A+ Gebrauchsanweisung Seite 64

The dishes are not dry
Problem Possible causes
Unsatisfactory drying Load incorrect
results
Insufficient amount of rinse aid
The dishes were removed too soon Do not empty the dishwasher immediately after washing. Open the door
Wrong program selected
Use of cutlery with low quality
coating
ATTENTION:
• If an overflow condition occurs, turn off the main water supply before contacting the After-Sales
Service.
• If there is water in the tub due to overfilling or a small leak, the water must be removed before
restarting the dishwasher.
What to do
Load the dishwasher according to the instructions.
Increase the amount of rinse aid/refill the rinse aid dispenser.
a little to let steam out. Start unloading the dishwasher only when the
dishes have become just warm to the touch. Empty the bottom rack first.
This will prevent water dripping from the dishes in the top rack.
The washing temperature is lower in the quick program. This reduces
washing results. Choose a program with a longer wash time.
Drying is more difficult with such cutlery. This type cutlery is not suitable
for putting in a dishwasher.
64