Fill The Rinse Aid Dispenser - IGNIS ADL 456/1 A+ Gebrauchsanweisung

C. Fill the rinse aid dispenser
Rinse aid dispenser
The rinse aid is dispensed during the final rinse to prevent drops of water on the dishes that would leave
stains and streaks. It also improves drying by allowing the water to run off dishes. The dishwasher is
designed for the use of liquid rinse aids. The rinse aid dispenser is on the inside of the door, next to the
detergent dispenser. To fill the dispenser, open the cap and add the rinse aid until the level indicator is
completely black. The rinse aid dispenser has a capacity of about 140 ml.
Rinse aid function
Rinse aid is automatically added during the last rinse to ensure thorough rinsing and drying free of stains
and streaks.
Attention!
Only use rinse aid specific for dishwashers. Never fill the rinse aid dispenser with other substances
(e.g. dishwasher detergent, liquid detergent), as this would damage the appliance.
When to refill the rinse aid dispenser
If the control panel does not have a rinse aid indicator, the rinse aid level can be judged by the color of the
optical indicator C next to the cap. When the rinse aid dispenser is full, all the indicator is dark. The dark
spot gets smaller as the rinse aid level decreases. Never allow the rinse aid level to fall below ¼ the
capacity of the dispenser.
As the rinse aid level decreases, the size of the dark spot on the rinse aid level indicator decreases, as
shown below.
Full
3/4 full
1/2 full
1/4 full - It must be refilled to remove stains
Empty
40
C (Rinse aid indicator)
6