Installation Instructions; Preparation For Installation - IGNIS ADL 456/1 A+ Gebrauchsanweisung

INSTALLATION INSTRUCTIONS

ATTENTION: Installation of the hoses and electrical components must be carried out by professional
technicians.
ATTENTION:
Danger of electric shock. Disconnect the power supply before installing the dishwasher.
Failure to take this precaution can result in risk of death or electric shock

Preparation for Installation

The dishwasher must be installed near the supply and drain hoses and the power cable.
Choose a side of the sink cabinet to facilitate connection of the dishwasher drain hoses.
NOTE: Check the installation accessories supplied (hook for external wooden panel, screw)
Read the installation instructions carefully.
Illustrations of the cabinet dimensions and dishwasher installation position Carry out all the necessary
preparations before positioning the dishwasher in the place installation.
1. Choose a position near the sink to facilitate the installation of the supply and drain hoses (see figure 1).
2. If the dishwasher is installed in the corner of the cabinet, a little space must remain (as shown in figure 2)
when the door is open.
90 °
90 °
820mm
Inlets for electricity,
580mm
water loading
80
and draining
100
Space between the
bottom of the cabinet
and the floor
450 mm
Figure 1
Cabinet dimensions
Less than 5 mm between the top of the dishwasher and the cabinet and the outside of the door aligned
with the cabinet.
54