VEVOR RVACLPFDC110150H Originalanleitung Seite 19

Each press decreases the set temperature by 1 degree Fahrenheit, cycling in the
following order:
"90 → 89 → 88 → 87 → 86 → 85 → 84 → 83 → 82 → 81 → 80 → 79 → 78 → 77
→ 76 → 75 → 74 → 73 → 72 → 71 → 70 → 69 → 68 → 67 → 66 → 65 → 64 →
63 → 62 → 61"
（8）Fan Speed Button:
Operation method: Low Fan/Sleep/ECO (two bars),
High Fan (six bars). Note: In Auto Fan mode,
dynamically.
（9） Sleep Button:
Pressing the button cycles through "Sleep → Cancel Sleep → Sleep". The sleep
icon will be displayed.
While the sleep function is active, pressing the Turbo button or the ECO

button will exit the sleep function.
（10） Fan Button:
remain steadily lit
（11） ION Button: Press this button to activate the ION function. Pressing the
button cycles through "ION → Cancel ION → ION".
（12）ECO Button: Press this button to activate the ECO function. Pressing the
button cycles through "ECO → Cancel ECO → ECO".
Timer Button
（13）
When the unit is on, press the Timer button once to begin setting the shut-off

timer. If no operation is performed for 3 seconds, the setting is confirmed. To
cancel the timer or reset the timer time, press and hold the Timer button for 3
seconds.
When no timer is set, press the Timer button once. The remote control screen

will display "1". The timer can then be set using the Increase/Decrease
buttons. Each press changes the time by one unit, cycling in the order:
1-2-3-4-5... up to 23-24, then repeating. During setting, you can quickly
cancel the timer by pressing and holding the Timer button for 3 seconds. After
3 seconds of blinking, the setting is confirmed, the set temperature is
displayed again,
Adjusts the fan speed of the air conditioner.
Press this button to activate the sleep function.
Press this button to activate fan mode. The fan icon will
and the indicator light turns on.
Medium Fan (four bars),
the icon is displayed