VEVOR RVACLPFDC110150H Originalanleitung Seite 17

Turn Negative Ion Mode on/off.
Turn Sleep Mode on/off.
Remote Control Manual
（1） ON/OFF Button:
Factory default settings: cooling mode, auto fan, and display of the current room
temperature (in Fahrenheit).
If it is not the first use after leaving the factory, the unit will remember the mode
settings prior to power failure.
（2）Mode Button:
Cycles through the modes in the following order: "Auto → Cool → Dry → Fan →
Heat".
Cooling Mode:

displayed, and the fan speed is set to auto. If it is not the first use after leaving
the factory, the unit will remember the temperature and fan speed settings
prior to power failure.
Dry Mode:

is set to low. If it is not the first use after leaving the factory, the unit will
remember the low fan speed setting prior to power failure.
Fan Mode:

after leaving the factory, the unit will remember the fan speed setting prior to
power failure.
Heat Mode:

and the fan speed is set to auto. If it is not the first use after leaving the factory,
the unit will remember the temperature and fan speed settings prior to power
failure.
Auto Mode: By default, the set temperature (in Fahrenheit) is displayed, and

the fan speed is set to auto. If it is not the first use after leaving the factory, the
unit will remember the temperature and fan speed settings prior to power
failure.
Used to turn the air conditioner on or off.
Switches the operating mode of the air conditioner.
By default, the set temperature (in Fahrenheit) is
By default, the temperature is not displayed, and the fan speed
By default, the fan speed is set to high. If it is not the first use
By default, the set temperature (in Fahrenheit) is displayed,