The fuse type and rating shall correspond to the markings printed on the relevant
controller or fuse holder.
The external static pressure of the unit at the test point is 0 MPa.
This rooftop air conditioner is supplied with a Y- type power connection. If the
power cord is damaged, it must be replaced by the manufacturer, an authorized
service agent, or similarly qualified personnel to avoid hazards.
The air conditioner is a Class I appliance. Reliable grounding must be
implemented. Ensure that the grounding conductor of the air conditioner is
securely connected to the vehicle's grounding system.
There are two methods for installing the rooftop air
conditioning unit:
1. Create a new opening. In this case, the opening must be reinforced with
suitable support frames.
2. Use an existing opening on the vehicle, such as a roof hatch or the space
left after removing an old air conditioner.
Create a new opening
A
B
Refer to the diagram and drill the corner holes (A).