Scheppach 5905112902 Originalbetriebsanleitung Seite 26

The safety, operating and maintenance specifications
of the manufacturer, as well as the dimensions speci-
fied in the technical data, must be observed.
The machine complies with the applicable EC machin-
ery directive.
• The rocking log saw is designed as a one-man
operating station and is only to be used outdoors.
• The rocking log saw is a transportable circular saw.
It can only be used for cross-cutting firewood with
feed rocker in accordance with the technical data.
• The saw is designed exclusively for cross-cutting
firewood.
• Regardless of the wood diameter, only one work-
piece may be placed on the swivel frame.
• Observe all safety and danger notices on the machine
and keep them complete and in legible condition.
• The working area and surroundings of the machine
must be kept free of disruptive foreign bodies in
order to prevent accidents.
• Basically, the timbers to be cut must be free of for-
eign bodies such as nails and screws.
• Only use the machine when in a technically faultless
condition, appropriately and in compliance with the
operating instructions and with full knowledge of
safety and hazards. In particular, rectify malfunc-
tions that could impair safety immediately (or com-
mission rectification works accordingly).
• The applicable accident prevention regulations and
the other generally accepted safety rules must be
complied with.
The manufacturer is not liable for damage caused by
improper use or incorrect operation.
Explanation of the signal words in the operating
manual
m
DANGER
Signal word to indicate
hazardous situation which, if not avoided, will
result in death or serious injury.
m WARNING
Signal word to indicate a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
26 | GB
Please note that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the device is
used in commercial or industrial applications, or for
equivalent work.
Residual risks
The machine has been built according to the state-
of-the-art and the recognised technical safety re-
quirements. However, individual residual risks can
arise during operation.
• Danger of injury for fingers and hands due to the rotat-
• Injuries due to the workpiece being ejected at high
• Risk to health due to noise. The permissible noise
• Injuries due to defective saw blade. Check the integ-
• Hazard due to electrical power, with the use of im-
• When using special accessories, the operating in-
an imminently
• Furthermore, despite all precautions having been met,
• Residual risks can be minimised if the "Safety in-
• Avoid accidental starting of the product: the oper-
www.scheppach.com
m
CAUTION
Signal word to indicate a potentially hazardous
situation which, if not avoided, could result in
minor or moderate injury.
ATTENTION
Signal word to indicate a potentially hazardous
situation which, if not avoided, could result in
product or property damage.
ing saw blade with improper guiding of the workpiece.
speed due to improper holding or guiding.
level is exceeded during operations. It is essential
that personal protective equipment, such as hearing
protection, is worn.
rity of the saw blade regularly and before each use.
proper electrical connection cables.
structions enclosed with the special accessories
must be observed and read carefully.
some non-obvious residual risks may still remain.
structions" and the "Proper use" are observed along
with the whole of the operating instructions.
ating button may not be pressed when inserting
the plug in a socket. Use the tool attachment that
is recommended in this operating manual. This is
how to ensure that your product provides optimum
performance.