Assembly; Inserting/Removing The Saw Blade; Attaching/Removing The Dust Extraction - Parkside Pstd 350 B1 Bedienungsanleitung Und Originalbetriebsanleitung

3. Check whether the product and all parts
are in good condition, if any damage or
defect is detected, do not use the prod-
uct, but follow the procedure described
in chapter "Warranty".
˜ Accessories
NOTE
This user manual contains information
u
and suggestions for several saw
blades and their uses. The saw blades
depicted are not necessarily included
in the shipment, but are meant to
indicate additional possibilities for
using this product.
To operate this product safely and
o
correctly, the following accessories, i.e.
tools and saw blades, are necessary:
– Suitable saw blade
Accessories and saw blades are
o
available through your authorised dealer.
When buying always consider the
technical requirements of this product
(see "Technical data").
If you are not certain, ask a qualified
o
specialist and get advice from your
trusted dealer.
The included saw blade
o
for cutting the following materials:
– Wood
– Plywood
– Plasterboard
– Similar materials
˜ Assembly
˜ Inserting/removing the saw
blade
WARNING!
m
Switch the product off and
remove the mains plug
the mains outlet before replacing
attachments, cleaning and when
not in use.
12 GB/IE/NI/MT
(Fig. B)
Inserting the saw blade
1. Turn the chuck ring
2. Insert the saw blade
3. Release the chuck ring
4. Before use: Pull on the saw blade
is suitable
Removing the saw blade
8 ] [
1. Turn the chuck ring
2. Pull the saw blade
3. Release the chuck ring
˜ Attaching/removing the dust
from
[ 2 ]
CAUTION! Risk of injury!
m
Saw blades
become hot during use. Always
wear protective gloves when
handling saw blades.
CAUTION! Risk of injury!
m
Do not use any blunt, bent or
u
damaged saw blade
Always install a suitable saw blade
u
for the job.
direction.
blade holder . The back of the saw
[ ]
blade has to must rest in the groove of
the saw blade guide roller
chuck ring return to the original position.
check if the saw blade is inserted safely
and tightly.
counter-clockwise direction.
blade holder .
[ ]
chuck ring return to the original position.
extraction
WARNING!
m
Switch the product off and
remove the mains plug
the mains outlet before replacing
attachments, cleaning and when
not in use.
can be sharp and
8 ] [
.
[ 8 ]
8 ] [
in a clockwise
[ ]
into the saw
8 ] [
.
[ 9 ]
and let the
[ ]
8 ] [
in a
[ ]
out of the saw
8 ] [
and let the
[ ]
from
2 ] [
to