General Power Tool Safety Warnings - Parkside Pwsa 20-Li D4 Originalbetriebsanleitung

Symbols on the device
The device is part of the X 20 V TEAM
series and can be operated with batteries
of the X 20 V TEAM series. Batteries of the
X 20 V TEAM series may only be charged
using chargers of the X 20 V TEAM series.
Read the instruction manual
Use eye protection
Do not use the guard cover without
attachment for cut-off grinding!
Always work with both hands!
Spindle lock
Direction of rotation
Direction arrow (Switching on)
Waste electrical and electronic
equipment (WEEE) must not be dis-
posed of with domestic waste.
Symbols on the accessories
Cutting disc
Read the instruction manual
Use eye protection
Use hearing protection
Use protective gloves
Use respiratory protection
Use foot protection
Do not use for side grinding
GB
Not permissible for wet grinding
Never use defective grinding discs
metal
General Power Tool Safety
Warnings
WARNING! Read all safety warnings,
instructions, illustrations and specifica-
tions provided with this power tool. Fail-
ure to follow all instructions listed below may
result in electric shock, fire and/or serious in-
jury. Save all warnings and instructions
for future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explos-
ive atmospheres, such as in the pres-
ence of flammable liquids, gases or
dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match the out-
let. Never modify the plug in any way.
Do not use any adapter plugs with
earthed (grounded) power tools. Un-
modified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, ra-
diators, ranges and refrigerators. There
is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain
or wet conditions. Water entering a
power tool will increase the risk of elec-
tric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplug-
ging the power tool. Keep cord away
from heat, oil, sharp edges or moving
IE NI CY
7