Inserting/Removing The Tool; Setting The Direction Of Rotation; Adjusting The Torque; Switching On/Off - Parkside Passk 20-Li C4 Bedienungsanleitung Und Originalbetriebsanleitung

˜ Inserting/removing the tool
Inserting the tool
1 . Select the desired socket:
Socket, 17 mm
–
Socket, 19 mm
–
Socket, 21 mm
–
Socket, 23 mm
–
2 . Push the socket
the tool holder
1 ] [
Removing the tool
NOTE
The tool holder
u
This allows inserting a detent pin
(not included) to lock an impact
socket (not included) with holes in
the corresponding positions of the
square connection .
Pull the socket
o
tool holder .
[ 1 ]
˜ Setting the direction of
rotation
(Fig . E)
NOTE
Operating the rotational direction
u
switch : The product must
4 ] [
be switched off and come to a
standstill .
Set the rotational direction switch
o
to one of the 3 positions:
Position of the
rotational direction
switch
[ 4 ]
Left
Middle
Right
16 GB/CY
[ 21 ]
[ 20 ]
[ 19 ]
[ 18 ]
/ / / into
18 ] [ [ 19 ] 20 ] [ 21 ] [
.
features a hole .
[ 1 ]
/ / / from the
18 ] [ [ 19 ] 20 ] [ 21 ] [
Rotational
direction
Clockwise
On/off switch
8 ] [
locked
Counter-
clockwise
˜ Adjusting the torque
NOTE
The product uses the previously
u
used torque setting when it is
switched on .
If the direction of rotation is set
u
counter-clockwise, the torque is
automatically set to the highest level .
Read the current torque: Press the
o
torque button
Adjust the set torque: Press the
o
torque button
desired torque setting is selected .
˜ Switching on/off
Switching on
Press and hold the on/off switch
o
The inserted socket
starts rotating .
Switching off
Release the on/off switch
o
˜ Speed control
Progressively controlling the speed:
o
Apply gentle or stronger pressure on
the on/off switch
Pressure
Gentle
Strong
4 ] [
˜ LED work light
NOTE
Improve visibility in poorly lit areas:
u
This product is equipped with a
LED work light
immediate working area .
After switching off the product:
u
The LED work light
approx. another 10 seconds.
As soon as the product is switched
on: The LED work light
on immediately .
briefly once.
6 ] [
repeatedly until the
6 ] [
/ / /
18 ] [ [ 19 ] [ 20 ] 21 ] [
.
8 ] [
.
8 ] [
Speed
Low
High
to illuminate the
[ 5 ]
stays on for
[ 5 ]
switches
[ 5 ]
.
8 ] [