Enabling/Disabling Bluetooth® At The Battery; Connecting The Battery To The Parkside App - Parkside Performance Paps 208 A1 Originalbetriebsanleitung

GB CY
The various functions may
change with updates to the
app and firmware.
Requirements
To find the device in the
PARKSIDE app, your smart-
phone must fulfil the follow-
ing requirements:
• The PARKSIDE app is
installed.
• BLUETOOTH® is en-
abled.
Only SMART
PERFORMANCE batteries
can be connected to the
PARKSIDE app.
Enabling/disabling
BLUETOOTH® at the
battery
BLUETOOTH® enable:
Press the button (2) for
about 3 seconds. The
centre LED lights up.
BLUETOOTH® disable:
Press the button (2). The
centre LED lights up after
approx. 3 seconds. Press
and hold the button. The
centre LED goes out after
10 seconds.
12
Connecting the battery
to the PARKSIDE app
Notes
• Once you have connec-
ted the battery to the
app, you will find it in the
list Your tools.
• If you have attached the
battery to a device and
the device is activated,
the device will be dis-
played under Your tools
instead of the battery.
• If the battery or the
device equipped with
it is not displayed in
the list, add the battery
manually.
Connecting the battery
manually
1. Yo ur to ols.
2. Select ➕ at the top
right.
3. Follow the instructions in
the app. The app scans
the surroundings for
available devices.
4. Select the battery you
wish to add.
5. Press Done.