Cleaning And Maintenance - Parkside Pdsa D3 Bedienungs- Und Sicherheitshinweise

˜ Cleaning and maintenance
WARNING!
m
Switch off the product and
remove the battery pack
before replacing attachments,
cleaning and when not in use.
˜ Cleaning
WARNING R
m
The product must not be sprayed
u
with water or cleaned under
running water.
NOTICE!
m
Do not use chemical, alkaline,
u
abrasive or other aggressive
detergents or disinfectants to
clean this product as they might be
harmful to its surfaces.
Wear protective equipment (e.g.
u
gloves, safety googles) during
cleaning.
Never blow the spray nozzle
u
with your mouth.
NOTE
Clean the product immediately
u
after each use.
Regular proper cleaning helps to
u
ensure safe use and prolongs the
life of the product.
Foreign bodies can accumulate in
u
the spray nozzle
spray nozzle.
Cleaning the container
1. Clean the container
water.
/
[ ] [ ]
out
8 ] [
and block the
8 ] [
with clean
[ ]
2. Release the water via the filler
opening.
3. Allow the container
completely.
Cleaning the housing
Clean the housing with a damp cloth.
o
Cleaning when the spray nozzle is
clogged
1. Clean the hole in the spray nozzle
of residue with a needle or thin
wire (not included in the scope of
delivery).
2. Rinse the spray nozzle
water.
3. Allow the spray nozzle
completely.
˜ M
The product is maintenance-free.
˜ Storage
NOTE
Empty the water fully from the
u
container . The product and
[ ]
accessories may be destroyed by
frost if they are not fully emptied of
water.
1. Switch off the product. Let the
product cool down.
2. Remove the battery pack
from the product before storing it for
a longer period of time (e.g. winter
storage).
3. Clean the product (see "Cleaning").
4. Store the spray lance
in the holder
6 ] [
nozzle pointing downwards.
8 ] [
5. Store the product and its accessories
in a dark, dry, frost-free, dust-
protected and well-ventilated place.
to dry out
[ ]
8 ] [
with clear
8 ] [
to dry
8 ] [
/
[ ] [ ]
inserted
[ 7 ]
with the spray
GB/IE/NI/CY/MT 51