Parkside PDSA D3 Bedienungs- Und Sicherheitshinweise Seite 45

Always carry out a visual
inspection before using
the product. Do not
use the product if it is
damaged. If the product
is damaged, have it
checked by qualified
personnel.
Always check the product
for leaks. If any are found,
correct them before using
the product.
When assembling or
removing accessories, do
not point them towards
yourself or other persons.
The product must only
be operated by 1 person
at a time. Nobody else
must be within a radius
of 15 metres at the same
time.
If there is no spray
coming out from the
nozzle or the spray
amount is decreased, the
hose and spray system
may be blocked. Rinse
and clean all parts of the
hose and spray system
with clean water.
After the product has
been stored for a long
time (e.g. during winter),
fill the spray tank with
clean water. Carry out
a test run to check if
there are any leakages or
cracks.
Release the residual
pressure in the spray
tank after each use
and especially before
removing the spray tank
cover. Do so by pressing
the trigger.
Do not modify the
product under
any circumstance.
Modifications may result
in serious injury.
All servicing and
maintenance, other
than the items listed in
this instruction manual,
should be performed by
an authorised service
centre.
Only use spare parts and
accessories provided
by the manufacturer. All
other repairs shall only
be carried out by an
authorised service centre.
Improper maintenance,
use of non-conforming
components and removal
of safety devices can
lead to a hazardous
situation, such as death,
GB/IE/NI/CY/MT 43