Parkside PDSA D3 Bedienungs- Und Sicherheitshinweise Seite 41

cord away from heat, oil, sharp
edges or moving parts. Damaged
or entangled cords increase the risk
of electric shock.
5) When operating a power tool
outdoors, use an extension cord
of a cord suitable for outdoor use
reduces the risk of electric shock.
6) If operating a power tool in a
a residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock.
Personal safety
1) Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
drugs, alcohol or medication. A
moment of inattention while
operating power tools may result in
serious personal injury.
2) Use personal protective
A
protection. Protective equipment
such as dust mask, non-skid
safety shoes, hard hat, or hearing
protection used for appropriate
conditions will reduce personal
injuries.
3) Prevent unintentional starting.
Ensure the switch is in the
-
tool. Carrying power tools with your
finger on the switch or energising
power tools that have the switch on
invites accidents.
4) R
tool on. A wrench or a key left
attached to a rotating part of the
5) Do not overreach. Keep proper
Use
6) Dress properly. Do not wear loose
7) If devices are provided for the
8) Do not let familiarity gained from
Power tool use and care
1) Do not force the power tool. Use
2) Do not use the power tool if the
/
3) Disconnect the plug from the
power tool may result in personal
injury.
times. This enables better control
of the power tool in unexpected
situations.
clothing or jewellery. Keep your
hair, clothing and gloves away
from moving parts. Loose clothes,
jewellery or long hair can be caught
in moving parts.
connection of dust extraction
and collection facilities, ensure
these are connected and properly
used. Use of dust collection can
reduce dust-related hazards.
tool safety principles. A careless
action can cause severe injury within
a fraction of a second.
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
switch does not turn it on and
Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
accessories, or storing power
tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
GB/IE/NI/CY/MT
/
39