Parkside PLBA 20-LI C4 Bedienungs- Und Sicherheitshinweise Seite 38

Ensure that you do
not touch any of the
dangerous moving parts
before you have removed
the battery pack from
the product, and that the
dangerous moving parts
have come to a complete
standstill.
Treat injuries properly or
seek medical assistance.
Do not overload the
product. Only work
within the power range
indicated. Do not
use low-performance
machines for heavy work.
Do not use the product
for purposes for which it
is not intended.
Main enance and s rage
Regularly check the
functionality and integrity
of the product to avoid
danger to the operator.
Replace worn or
damaged parts in the
interests of safety. Only
use original replacement
parts and accessories.
Do not try to repair the
product yourself, unless
you have professional
training. All work not
38 GB/IE/NI/CY/MT
mentioned in these
instructions may only be
performed by authorised
service representatives
commissioned by us.
Store the product in a dry
place and out of reach of
children.
Treat the product with
care. Clean the ventilation
slots regularly and
follow the maintenance
instructions.
Keep the ventilation slots
free of debris.
Do not use the product
if it cannot be switched
on and off. A damaged
switch must be replaced
at a customer service
workshop.
Switch off the product
before maintenance,
inspection, storage or
to change accessories.
Remove the battery
pack. Ensure that all
moving parts have come
to a standstill. Allow
the product to cool
down before inspection,
changing settings etc.
Maintain the product with
care and keep it clean.