Parkside PLBA 20-LI C4 Bedienungs- Und Sicherheitshinweise Seite 37

out other work on the
product,
after contact with
–
foreign bodies,
if abnormal vibration
–
occurs.
Do not use the product
in a closed or poorly
ventilated area.
Do not use the product
near flammable li uids
or gases. There is a risk
of fire or explosion if this
advice is not heeded.
In the case of an
accident or malfunction
during operation,
switch off the product
immediately and remove
the battery pack. Read
the "Troubleshooting"
section to correct any
malfunctions or contact
our Service Centre (see
"Service ).
Prior to starting the
product, ensure that the
impeller wheel is not
clogged.
Keep your face and body
away from the aperture of
the blower pipe.
Do not allow hands
or other body parts or
clothing to enter any part
of the motor housing,
or to be in the vicinity of
moving parts.
Do not tilt the product
during operation.
Keep the battery pack
free of refuse or other
accumulated material to
prevent the battery pack
from becoming damaged
and to avoid a potential
fire.
Do not transport the
product while it is
switched on or if the
battery pack is installed.
If the product starts to
emit unusual noises or
vibrate, immediately
switch off the product.
Wait for the moving parts
to come to a standstill.
Remove the battery pack.
Perform the following
steps before restarting
and operating the
product:
Check the product for
–
damage.
Replace damaged parts
–
or have them repaired.
Check the product for
–
loose parts and tighten
as necessary.
GB/IE/NI/CY/MT 37