Parkside PLBA 20-LI C4 Bedienungs- Und Sicherheitshinweise Seite 35

stones, cans and other
foreign bodies.
Before starting to work
with the product, use a
rake or broom to remove
foreign bodies.
Use the blower pipe
so that you can direct
the airflow close to the
ground.
In very dry conditions,
lightly moisten the
surface to be cleaned or
use a sprayer to reduce
the build-up of dust.
Do not work with a
damaged or incomplete
product or one which has
been converted without
the permission of the
manufacturer.
Before use, check the
safety status of the
product, in particular the
on/off switch.
Only use the product
when fully assembled.
Never operate the
product with defective
protection equipment or
faulty protection covers
or without any protection
equipment.
The operator or user is
responsible for accidents
and injuries to other
people or damage to their
property.
Operate the product
in the recommended
position and only when
standing on a solid, flat
surface.
Do not operate the
product on a paved
surface or a gravel
surface where the ejected
material could cause
injury.
Always perform a visual
inspection prior to use
to make sure that the
housing is undamaged
and the protective
equipment and shields
are present.
Replace worn or
damaged components in
sets to ensure balance.
Replace damaged or
illegible markings.
Operation
Avoid an abnormal body
posture. Always maintain
your balance to ensure
secure footing on slopes.
Walk at a steady pace,
do not run.
GB/IE/NI/CY/MT 35