Overload Protection - Homcom 823-084V72 Bedienungsanleitung

EN

5.4.5 Overload Protection

In the event of a power loss, to protect the compressor there is a 3-minute delay until
the compressor restarting.
5.5 DRAINAGE
Manual drainage:
1. When the machine stops after the water is full, please unplug the power plug.
Notes: Please move the machine carefully, so as not to spill the water in the water
pan at the bottom of the body.
2. Place the water container below the side water outlet behind the body.
3. Unplug the water plug, the water will automatically flow into the water container.
Notes:
1. Keep the water plug properly.
2. During drainage, the body can be tilted slightly backwards.
3. If the water container cannot hold all the water, before the water container is full,
stuff the water outlet with the water plug as soon as possible to prevent water from
flowing to the floor or the carpet.
4. When the water is discharged, stuff the water plug.
Notes: 1. Restart the machine after the water plug and drainage cover are installed,
otherwise condensate water of the machine will flow to the floor or the carpet.
15