HOMCOM 823-084V72 Bedienungsanleitung Seite 9

EN
4.2 Choose your location
• If tipped more than 45°, allow the unit to set upright for at
least 24 hours before start up.
Place the unit on a firm, level surface in an area with at least
•
50cm of free space around it to allow for proper air
circulation.
Do not operate in close proximity to walls, curtains, or other
•
objects that may block air inlet and outlet. Keep the air inlet
and outlet free of obstacles.
Never install the unit where it could be subject to：
•
- Heat sources such as radiators, heat registers, stoves or other products that products
that produce heat.
- Direct sunlight
- Mechanical vibration or shock
- Excessive dust
- Lack of ventilation, such as cabinet or bookcase
- Uneven surface
4.3 ATTACH THE EXHAUST HOSE
The air conditioner requires being vented outside so that the exhaust air can escape the
room which coming from the appliance contains waste heat and moisture.
Do not replace or extend exhaust hose which will result in decreased efficiency, even
worse shut down the unit due to low backpressure.
Step 1: Connect the hose connector to one end of the exhaust hose.
WARNING!
Install the unit in rooms which exceed 6 m².
Do not install the unit in a place where inflammable gas may leak.
NOTE!
The manufacture may provide other suitable example or may provide
additional information about the refrigerant odour.
8