HOMCOM 823-084V72 Bedienungsanleitung Seite 13

EN
Information on How to Use the App
This appliance allows you to operate the appliance via your home net-work. A
prerequisite is a permanent WIFI connection to your router and the free app "Smart
Life".
1. Install the "Smart Life" app. Create a user account.
2. Activate the WIFI function in the settings of your appliance.
3. Place the appliance at a distance of about 5 meters to your router.
4. Long press the "Timer" button to start the network configuration, when the WIFI
indicator flashes, you can connect the WIFI. After 3 minutes, the status will be
canceled if there is no network configuration, and the indicator light is off. If you
need to re-connect the WIFI, long press the "Timer" button to start the network
configuration again, the WIFI indicator will flashes again.
WIFI Connected
Method 1
• Connected via Bluetooth
• Open the bluetooth of your mobile phone or other device.
• When WIFI indicator flashes, open "Smart Life" APP, the unit will connected via
bluetooth automatically.
Method 2
• When WIFI indicator flashes, select "Add Device"-"Large Home Appliances"-
"Portable Air Conditioner", and follow the instructions on the display.
• Check the status of the WIFI indicator and choose the correct status.
• If the WIFI indicator flash rapidly, it can connected directly.
• If the WIFI indicator flash slowly, press"Go to Connect" to connect the WIFI named
"SmartLife-XXXX", then back to the APP, the WIFI will connect ok.
Remarks:
• Once the appliance has been successfully connected, the WIFI lamp lights up. Now
you can operate the appliance using the app.
• Press and hold the Timer button for about 5 seconds, the appliance disconnect, the
WIFI lamp lights off.
WiFi and Bluetooth main technical parameters
• Frequency range(WiFi):2400-2483.5MHz ;RF power≤20dBm(EIRP)
• Frequency range (BLE) :2400-2483.5MHz; RF power≤20dBm(EIRP)
12