Parkside PSBSA 20-Li E4 Bedienungsanleitung Und Originalbetriebsanleitung Seite 15

3) Apply pressure only in direct line
with the drill bit and do not apply
excessive pressure. Drill bits can
bend causing breakage or loss of
control, resulting in personal injury.
˜ Impact drilling safety
warnings
WARNING!
m
Wear ear protection!
Wear dust protection!
Impact drilling operations may deal
with materials which can produce
harmful or toxic dust irritating to eyes
and respiratory system. It presents a
health hazard for the person operating
the power tool and anyone else in the
vicinity.
Ensure that you are not likely to hit
power, gas or water supply lines when
you are working with the power tool.
If necessary, check with a service line
detector before you start to cut or drill
into a surface.
˜ Vibration and noise reduction
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and low-noise
operating modes as well as wear personal
protective equipment.
Take the following points into account to
minimise the vibration and noise exposure
risks:
Only use the product as intended by
its design and these instructions.
Ensure that the product is in good
condition and well maintained.
Use correct accessory tools for the
product and ensure they are in good
condition.
Keep tight grip on the handles/grip
surface.
Maintain this product in accordance
with these instructions and keep it well
lubricated (where appropriate).
Plan your work schedule to spread any
high vibration tool use across a longer
period of time.
˜ Behaviour in emergency
situations
Familiarise yourself with the use of this
product by means of this instruction
manual. Memorise the safety warnings
and follow them to the letter. This will help
to prevent risks and hazards.
Always be alert when using this
product, so that you can recognise and
handle risks early. Fast intervention
can prevent serious injury and damage
to property.
S itch the product off if there are
malfunctions. Have the product
chec ed by a ualified professional
and repaired, if necessary, before you
operate it again.
˜ Residual risks
NOTE
This product produces an electro-
u
magnetic field during operation This
field may under some circumstanc-
es interfere with active or passive
medical implants! To reduce the risk
of serious or fatal injury, we recom-
mend persons with medical implants
to consult their doctor and the
medical implant manufacturer before
operating this product!
GB/IE/NI/MT 13