Parkside PSBSA 20-Li E4 Bedienungsanleitung Und Originalbetriebsanleitung Seite 11

Rear handle
Hand/arm vibration a
Uncertainty K:
Impact drill mode:
Sound pressure level L
Uncertainty K :
pA
Sound power level L
Uncertainty K :
WA
Front handle
Hand/arm vibration a
Uncertainty K:
Rear handle
Hand/arm vibration a
Uncertainty K:
Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN 62841:
WARNING!
m
Wear ear protection!
NOTE
The declared vibration total value
u
and the declared noise emission val-
ue have been measured in accord-
ance with a standard test method
and may be used for comparing one
tool with another.
The declared total vibration value
u
and the declared noise emission
value may also be used for a
preliminary assessment of exposure.
: 0.83 m/s
2
h,D
1.5 m/s
2
: 2.6 dB
pA
5 dB
: 100.6 dB
WA
5 dB
: 10.57 m/s
2
h,ID
1.5 m/s
2
: 15.28 m/s
2
h,ID
1.5 m/s
2
WARNING!
m
The vibration and noise emissions
u
during actual use of the power tool
can differ from the declared values
depending on the manner in which
the tool is used, especially what kind
of workpiece is processed.
Try to minimise exposure to vibration
u
and noise. Examples of measures
to reduce vibration include wearing
gloves when using the tool and
limiting working time. All parts of the
operating cycle must be taken into
account (e.g. times when the power
tool is s itched off and hen it is
running idle in addition to the trigger
time).
Safety instructions
˜ General power tool safety
warnings
WARNING!
m
Read all safety warnings,
u
instructions, illustrations and
speci cations pro ided
power tool. Failure to follo all
instructions listed below may result
in electric shoc
injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
ith this
fire and or serious
GB/IE/NI/MT 9