Parkside Performance PDSSAP 20-Li D3 Bedienungsanleitung Und Originalbetriebsanleitung Seite 39

˜ Attaching/removing an
insertion tool
NOTE
The directional information in this
u
section should be interpreted as
meaning that the user is positioned
behind the product.
Impact-resistant accessory or socket
u
adapter must be used, a non-impact
rated accessory may cause a
reduction in the fastening torque or
damaged accessories.
Attaching an insertion tool
(Fig. D)
1. Insert a bit holder
adapter into the tool holder
[ ]
2. Push a screw bit or socket onto the bit
holder or socket adapter
[ ]
3. Check that the insertion tool is firmly
secured by pulling on it.
Removing an insertion tool
(Fig. D)
CAUTION! Risk of burns!
m
Insertion tools can become very hot.
u
Wear protective gloves whenever
appropriate.
1. Unlocking the tool holder
locking sleeve
2 ] [
2. Remove the insertion tool.
˜ Checking the charging level
of the battery pack
Press next to the charging level
[ 8 ]
o
indicator on the battery pack
[ 9 ]
The charging level of the battery
pack is indicated by illumination of
[ 6 ]
the corresponding LED lights on the
charging level indicator
38 GB/IE
or socket
[ ]
.
[ 1 ]
.
[ ]
: Slide the
1 ] [
forwards.
.
6 ] [
.
[ 9 ]
Indicator Colour
Red, orange,
green
Red, orange
Red
Charge the battery pack
o
only the red LED on the charging level
indicator is illuminated.
[ 9 ]
˜ Charging the battery pack
NOTICE! Risk of damage to the
m
battery pack
6 ] [
Do not expose the battery pack
u
to direct sunlight for long periods
and do not place it on a radiator.
Observe an ambient temperature of
max. +50 °C.
NOTE
ou can find detailed instructions in
u
the user manual of the charger
If the battery pack
u
allow it to cool down before
charging.
1. Remove the battery pack
product.
2. Push the battery pack
charging slot of the charger
3. Connect the charger
outlet.
4. After charging: Disconnect the
charger from the socket-outlet.
[ ]
5. Pull the battery pack
charger .
[ ]
Meaning
Fully
charged
Partially
charged
Needs to be
charged
when
6 ] [
!
[ 6 ]
.
[ ]
is still warm,
6 ] [
from the
[ 6 ]
into the
6 ] [
.
[ ]
to a socket-
[ ]
out of the
6 ] [