Display Software Version - Sentiotec WAVE.COM4 Bedienungsanleitung

OPERATING INSTRUCTIONS 47/52

8.7.0 DISPLAY SOFTWARE VERSION

By simultaneously pressing the keys , and in the standby mode,
the software version number of the sauna base section is shown for 3 seconds; e.g.: „ 14".
If, within this time, you press the key again, then the software version number of the
control element is displayed preceded by a "P"(like Panel), so that it can be distinguished from the
base section. e.g.: "P14"
If you operate the control element in the single/master mode (without base section), only the
control element version is displayed.
Once the time has ended, the display then returns to the standby mode.
WE DO IT FIRST.