Switch Off; Modes - Sentiotec Wave.com4 Bedienungsanleitung

OPERATING INSTRUCTIONS

7.2.0 SWITCH OFF

If the colour control was switched on, it is deactivated by pressing the
The colours are switched off and the normal internal lighting goes on.

7.3.0 MODES

Mode
8.3.1. Off
8.3.2. Automatic Colour
8.3.3. Automatic time
8.3.4. Brightness
8.3.5. Manual
WE DO IT FIRST.
Display symbols Description
No Colour active. The sauna interior is
only lit up by the normal internal
lighting
The chroma is automatically further
switched after the programmed time.
The chroma can be manually further
switched. When colour 7 ends, the
control again changes to colour 1
(=rollover). The display shows the
number belonging to the particular
active chroma.
Here, too, the chroma is automatically
further switched after the programmed
time (as in Automatic mode).
The sequence time for the particular
active chroma can be extended or
shortened in minute steps. This setting
is only active for one cycle. After this,
there is a change again to the
standard cycle time.
The display shows the time still
remaining (minutes) of the particular
chroma. (=countdown)
The brightness of the particular
chroma can be set in this mode. 0-
100% in 5% steps.
The chroma never changes. No time
lapse. The display shows die number
belonging to the active chroma. The
+/- keys can be used to select the
colour desired.
42/52
key .