Warranty; Technical Specifications - Keeler D-Kat R Gebrauchsanweisung

D-KAT Tonometer by KEELER

14. WARRANTY

Your Keeler product is guaranteed for 2 years and will be replaced, or repaired free of charge
subject to the following:
• Any fault due to faulty manufacture.
• The instrument and accessories have been used in compliance with these instructions.
• Proof of purchase accompanies any claim.
The manufacturer declines any and all responsibility and warranty
coverage should the instrument be tampered with in any manner or
should routine maintenance be omitted or performed in manners not in
accordance with these manufacturer's instructions.
There are no user serviceable parts in this instrument. Any servicing or
repairs should only be carried out by Keeler Ltd. or by suitably trained and
authorised distributors. Service manuals will be available to authorised
Keeler service centres and Keeler trained service personnel.

15. TECHNICAL SPECIFICATIONS

Keeler digital T type: for Haag Streit type
illumination systems
Keeler digital R type: for some Zeiss type and
Haag Streit type illumination systems
Installation
Measurement range
Measurement deviation
Reverse span (Hysteresis)
Net weight
Keeler digital T type
Keeler digital R type
Part Numbers
Keeler digital T type
Keeler digital R type
EN
Fitted to the guide plate on the optical axis for
the microscope and illumination unit arm
Mountable on post on microscope
Assembled on the guide plate on the slit lamp
arm or mounting post
0 - 65 mmHg (0 - 8.65kPa)
0.49 mN or 1.5% of measurement value,
whichever is the greater
≤ 0.49 mN
0.37 kg (without accessories)
0.58 kg (without accessories)
2414-P-2032
2414-P-2042
20