Name Of Components; Switching On / Off And Configuring The D-Kat; Switching On / Off; Changing Decimal Point Setting - Keeler D-Kat R Gebrauchsanweisung

D-KAT Tonometer by KEELER

5. NAME OF COMPONENTS

1. Power / function button
2. Main body
3. Rotating measurement drum
4. Doubling prism
5. Measurement arm
6. Manufacturers data
4
5
2
R type D-KAT (fixed)
Part number: 2414-P-2042

6. SWITCHING ON / OFF AND CONFIGURING THE D-KAT

6.1 SWITCHING ON / OFF

To switch the D-KAT on, press the function button briefly and the display will show a nominal
reading. The D-KAT can be switched off by pressing the function button again. The unit will
power down when not in use after 3 minutes.

6.2 CHANGING DECIMAL POINT SETTING

Turn on the D-KAT and press the function button for more than 3 seconds. The display will flash
briefly. Release the function button: 'dP' (decimal point) or 'ndP' (no decimal point) will be
displayed. Press the function button briefly to toggle between both. Once the desired display has
been set release the function button and the D-KAT will return to the pressure readings display.
EN
7. T type mounting assembly
8. R type mounting assembly
9. Calibration arm socket
10. Battery cover
11. LED display
8
10
11
1
8
4
5
2
11
9
7
T type D-KAT (take-away)
Part number: 2414-P-2032
3
6
10
9
3
6
1