Whirlpool PACW9COL Gebrauchsanweisung Seite 32

Install Exhaust Hose and Adapter
1. Roll the air conditioner to selected location.
See "location Requirments".
2. Attach the window exhaust adapter to the
flexible exhaust hose. Turn anticlockwise until
securely locked into place.
A Flexible exhaust hose
B Window exhaust adapter
3. Insert the dummy coupling into the slot on the
back of the air conditioner.
4. Put and rotate to lock the hose into place.
A. Flexible exhaust hose
Window Installation
1. Your window slider kit has been designed to fit
most standard vertival and horizontal window
applications. Roll the air conditioner to selected
location. See "Location Requirements".
2. Insert the window exhaust adapter into the slot
on the window slider kit.
A.Window slider kit
B.Window exhaust adapter
A
2
1
B
A
2
1
A
B
Rain Cover Installation
Attach the rain cover to the holes of the outer
slider section. Then slide the rain cover until
securely locked place.
Horizontal Installation
A
B
A. Out slider section
B. Rain cover
Complete Installation
1. Place the window-lock bracket on top of the
lower window and against the upper window
sash.
2. Use 1/8" drill bit to drill a starter hole through
the hole in the bracket.
3. Attach the window-lock bracket to the window
sash with wood screw(provdie 4) to secure the
window in place.
A
B
A. Upper window sash
B. Window-lock bracket
4. Insert the foam seal behind the top of the lower
window sash and against the glass of the upper
window.
A
A. Top of lower window sash
B. Foam seal
32
Vertical Installation
A
B
B