Whirlpool PACW9COL Gebrauchsanweisung Seite 27

1. Press MODE to select Cooling, Dry or Heating.
NOTE: Sleep mode cannot be selected when Fan
Only is selected.
2. Press the or
temperature.
3. Press SLEEP . After 10 seconds, the lights on the
control panel display will dim.
NOTE: The temperature and airflow direction
may be adjusted during Sleep control. The fan
speed is automatically set to Low speed. After 10
seconds, the lights on the control panel display will
dim again.
4. To turn off Sleep control, press SLEEP , MODE,
FAN, ON/OFF or wait 8 hours for Sleep control to
turn off automatically.
DIM function
Press the DIM button to turn off the light and the
display in the unit.
NOTES: When the light is off, receive signal will
turn on the light again.
TIMER function
It's convenient to set the timer on with TIMER
button before you leave so that you will come
back to the comfortable room temperature you
set. Press the TIMER button to set a switch-on
button when the appliance is off. Press the TIMER
button to set a switch-off timer during operation.
How to set TIMER
1. Set desired operating mode, temperature setting
and fan speed firstly, then press the TIMER button
and "01h" flashed on LCD.
2. Set desired operating mode, temperature setting
and fan speed firstly, then press the TIMER button
and "01h" flashed on LCD.
3. Point the remote control at the signal receptor
of the unit, press the + or – button when"01h"
flashes.
Choose the timer you want, then press the TIMER
button.
• A "beep" can be heard.
• Timer indicator on the control panel lights up.
• "h" stops flashing.
4. To cancel the set timer: press the TIMER button
again, a "beep" can be heard.
button to set the
27
NOTES:
• The range can be set is 1 hour to 10 hours.
• After setting a switch-on timer when the
appliance is off, the Timer light on the control
panel lights and
• Setting a switch-off timer when the unit
working, the Timer light of the control panel
lights up.
Changing Air Direction
Press SWING once to change vertical airflow
direction. Press again to stop airflow louver at
desired airflow direction.
Normal Sounds
When your air conditioner is operating normally,
you may hear sounds such as:
• Air movement from the fan.
• Clicks from the thermostat cycle.
• Vibrations or noise due to poor wall or window
construction.
• A high-pitched hum or pulsating noise caused by
the modern high-efficiency compressor cycling
on and off.