Whirlpool PACW9COL Gebrauchsanweisung Seite 25

FUNCTION DESCRIPTIONS
Power On or Off
Press ON/OFF button to turn on or off the unit.
NOTE:
• Changing the mode during operation.
Sometimes the unit does not response at
once,wait 3 minutes
• Wait 3 minutes before restarting the appliance.
Selecting mode
1. Press and release MODE until you see the
symbol glow for the desired setting.
Mode
2. Choose Cooling, Dry, Fan Only or Heating.
• Cooling-Cools the room. Press Fan to select
Auto, High, Mid or Low. Press the up or down
Adjust button to adjust the temperature.
• Dry-Dries the room. The air conditioner
automatically selects the temperature. Fan runs
on Low speed only.
NOTE: Dry mode should not be used to cool the
room.
At "Dry" mode, the unit can decrease or rise
2ºC(3°F or 4°F) if you still feel uncomfortable.
• Fan Only-Only the fan runs. Press FAN to select
High, Mid or Low.
NOTE: Auto fan speed cannot be selected in Fan
Only mode.
• Heating- Heaters the room. Press FAN to select
the fan speed. Press the up or down button to
select the temperature.
6th Sense mode
The air conditioner automatically selects Cooling
or Dry mode,depending on room temperature
and sets the target temperature.
Operation mode and temperature are determined
by indoor temperature.
Indoor Operation
temperature
21°C or below
21°C-23°C FAN ONLY
23°C-26°C
Over 26°C COOLING
Electric Heat models
Indoor Operation
temperature
21°C or below FAN ONLY
23°C-26°C
Over 26°C COOLING
Cooling only models
NOTE: Temperature, airflow and direction are
controlled automatically in 6th Sense mode.
However, a decrease or rise of up to 2°C can be
set with the remote control if you still feel
uncomfortable.
1. Press 6th Sense button.
th
6 S e n s e
2. In Fan Only mode, press Fan to select High, Mid
or Low.
25
Target
mode temperature
HEATING 22°C
Room
temperature
DRY decrease 2°C
after operating
for 3 minutes
26°C
Target
mode temperature
Room
temperature
DRY decrease 2°C
after operating
for 3 minutes
26°C