Baxtran RTN-15 Bedienungsanleitung Seite 47

6. OPERATION
INITIAL START-UP
Warm-up time of 15 minutes stabilizes the measured values after switching on.
6-1. BASIC OPERATION
6-1-1. POWER ON/OFF
Switch on the balance by pressing power On/ Off key. The display is switched on and the test is started and if want to switched off,
press backward the key.
6-1-2. ZERO
Environmental conditions can lead to the balance exactly zero in spite of the platform not taking any strain. However, you can set the
display of your balance to zero any time by pressing
6-1-3. TARE
The weight of any container can be tared by pressing
weighed is always displayed.
» Load weight on the platform
» Press key. Zero is displayed, and tare is subtracted.
» Remove weight on the platform. Tared weight is displayed. It will be shown with a minus value.
» To clear the tare value, remove the load and press
6-1-4. UNIT PRICE SETTING
Place the goods on the platform
Enter the unit price by pressing numeric keys.
50.00
For e.g.:
Unit price display will be shown the entered value and total price display will be shown price of the goods.
Press key to replace the previous unit price.
key and therefore ensure that the weighing starts at zero.
button so that with subsequent weighing the net weight of the object being
. key. Zero is displayed, tare weight is cleared.
USER MANUAL RTN ENG
47