Remote Control - Dometic Coolair Rtx1000 Bedienungsanleitung

Operation
6.3

Remote control

The remote control contains the following operating elements:
No. in
fig. 3, page 4
1
2
3
4
5
6
7
8
9
6.4 Display
The display has the following indicators:
No. in
fig. 4, page 5
1
2
12
Symbol Description
Press button briefly: Switches the parking cooler to
standby mode or on again, if it is in standby mode
Press button longer than 3 s: Switches the parking
cooler off
The parking cooler only can be switched on at the control
panel.
Increases the timer running time by 10 min.
Reduces the set point by 1 °C/2 °F.
–
Increases the set point by 1 °C/2 °F.
+
Switches the parking cooler to MANUAL mode and
–
reduces the speed of the fan.
Switches the parking cooler to MANUAL mode and
+
increases the speed of the fan.
Switches the parking cooler to AUTO mode.
Switches the parking cooler to ECO mode.
Switches the parking cooler to BOOST mode.
Description
The symbol shows the current menu selected (see chapter "Using
menus" on page 16).
Depending on the current menu, shows:
• The required temperature
• The current fan speed
• The remaining running time of the timer
RTX1000/2000, SPX1200
EN