Network; Remote Console; Interface - Carl Valentin DUOPRINT Kurzanleitung

Network

Keys: , , ,
For more information, please see the separate manual.

Remote Console

Keys: , , ,
For more information please contact our sales department.

Interface

Keys: , , ,
COM1 / Baud / P / D / S
Key:
Start sign / End sign
Key:
Data memory
Key:
Port test
, ,
, , ,
, , , ,
COM1:
0 - serial interface Off
1 - serial interface On
2 - serial Interface On; no error message occurs in case of a transmission error.
Baud rate:
Indication of bits which are transferred per second.
Following values are possible: 1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200.
P = Parity:
N - No parity
E - Even
O - Odd
Please observe that the settings correspond to those of the printer.
D = Data bits
Setting of data bits.
Value range: 7 or 8 Bits.
S = Stop bits
Indication of stop bits between bytes.
Value range: 1 or 2 stop bits.
SOH: Start of data transfer block
ETB: End of data transfer block
Standard: After starting a print order the printer buffer receives data as long as it is filled.
Advanced: During a current print order data is received and processed.
Off: After starting a print order no more data is received.
Check whether the data are transferred via the interface.
Press the and keys to select standard (on). Press the
any port (COM1, LPT, USB, TCP/IP) is printed.
English
Hex format 01
Hex formal 17
DuoPrint
key and the data sent via
91