Menu System; Selecting Options - Nibe Rmu 40 Installateurhandbuch

MENU SYSTEM

When RMU 40 is started, you come to the information menu.
Certain basic information about the main product's status
is shown here. The indoor temperature is displayed with re-
spect to the selected climate system.
Outdoor temperature
Indoor temperature
Hot water temp.
Press any button to go to the main menu.
The information menu shows:
• on starting.
• when the back button in the main menu is pressed.
• after 15 minutes of inactivity.
In the event of an alarm, a symbol is shown at the top edge
of the display together with the alarm's number. Go to the
main product to obtain more information.
OPERATION
To move the cursor, press the up or down button. The
marked position is brighter and/or has a turned up tab.
SELECTING MENU
To advance in the menu system select a sub-menu by
marking it by using the up and down buttons and then
pressing the OK button.
18
Temp lux activated
Clock

SELECTING OPTIONS

auto
addition
manual
heating
cooling
add. heat only
In an options menu the current selected option is indicated
by a green tick.
To select another option:
1. Mark the applicable option using the up or down button.
One of the options is pre-selected (white).
2. Press the OK button to confirm the selected option.
The selected option has a green tick.
SETTING A VALUE
To set a value:
1. Mark the value you want to set using the up or
down button.
2. Press the OK button. The background of the value
becomes green, which means that you have ac-
cessed the setting mode.
3. Press the up button to increase the value or the
down button to reduce the value.
4. Press the OK button to confirm the value you have
set. To undo and return to the original value, press
the back button.
op. mode 4
RMU 40 | EN