Battery Indication - Tietzsch omegaMegaSafe ISO 1Ex Bedienungsanleitung

6. Battery

6.1 Battery indication

The latest battery status is symbolised by a three-
stage battery indicator on the display.
indication of battery status
replace the battery soon –
few measurements possible
(Battery symbol flashing: no
further measurements admissible!)
Attention!
When the empty battery symbol flashes, then no
more measurements can be performed and the
battery has to be replaced immediately.
The device requires a 9 V block battery IEC 6LR61 /
6LF22 (alkali-manganese).
The battery may only be replaced
outside of Ex areas.
For replacing the battery the rear cover needs to be
unscrewed.
 You may only insert the following types of
batteries:
DAIMON MN1604; IEC 6LR61
Duracell MN 1604 Plus Power Duralock (6LF22)
 The connectors, jacks and contacts have to
be kept clean.
 Regularly make sure that the battery does not
leak. In case it does you have to replace the
electrolyte completely and insert a new battery.
 In case of a longer storage period the ISO 1EX
needs to be kept without battery at a dry and
clean place with temperatures between -10°
and + 70°C.
Note:
Included in the scope of delivery is one battery.
These battery is not to be re-charged. Attempting to
recharge it may cause risk to personal safety and da-
mage to the equipment. The battery may not to be
opened. Depleted batteries must not be disposed
with the domestic waste. Please, return batteries at a
local retailer or municipal recycling depot. Return is
free of charge and required by law.
31