Care And Maintenance; Mist Unit - Sharp FU-S63E Bedienungsanleitung

CARE AND MAINTENANCE

To maintain optimum performance of this air purifier, please clean the unit including the
sensor and filters periodically.
When cleaning the unit, be sure to unplug the power cord, and never handle the plug with
wet hands. Electrical shock and/or bodily injury may occur as a result.

MIST UNIT

2 weeks
Care Cycle
The MIST Filter Indicator Light up.
The frequency of maintenance (descaling) will depend on the hardness of the water that you
use; the harder the water the more often descaling will be necessary.
1
Remove THE MIST Unit.
Remove the front panel and the filter
frame. (See Page E-6)
Remove the tank.
• Be careful of the
water drops that may
fall.
• Remove all the water
drops that are on the
tank cap before you
pull out the tank.
Take the MIST Unit from the Main
Unit.
• Use both hands to pull out the MIST
Unit to avoid spilling of water.
2 Take apart the MIST Unit.
Remove the MIST Tray Cap and drain
the water by tilting the MIST Unit slowly.
MIST Tray Cap
Remove the MIST Filter Set from the
MIST Tray.
• Be careful of the water drops that may
fall.
• Do not take the MIST Filter out of a
MIST Filter frame, to maintain its shape.
MIST Filter
set
Remove the MIST Tray Top.
Carefully remove the MIST Tray Top.
If excessive force is applied all at once
it may get damaged.
MIST Tray Top
MIST Tray
Preparing the descaling
3
solution.
Citric acid, available at some drugstores, or
100% bottled lemon juice are used for
descaling. Choose either one to use, and
prepare the descaling solution.
<For using citric acid>
Dissolve 3 teaspoons of citric acid and 600 ml of luke-
warm water in a suitable container, and stir well.
<For using lemon juice>
Use only bottled 100% lemon juice with no pulp
(please check before using and strain through a fine
strainer there seems to be some pulp). Pour 50 ml of
lemon juice and 600 ml of luke-warm water in a
suitable container, and stir well.
E-14
MIST Filter
MIST Frame
MIST Tray