Operation; Main Unit Controls; Main Unit Operation - Sharp FU-S63E Bedienungsanleitung

OPERATION

MAIN UNIT OPERATION

Power ON/OFF Button
1
• Used to start operation (short beep) and stop operation (long beep)
• Plasmacluster Indicator Light and Fan Speed Indicator Light turn on/off.
• Unless unplug the power cord, the operation starts in the previous mode the unit was
operated in.
• When stop operation during ION SHOWER Operation, the unit will back to the prior
operation of ION SHOWER Operation.
MODE Selection Button
2
• The operation mode can be switched, and the Indicator Light will turn on.
AUTO operation
The fan speed is automatically switched
(HIGH*, MEDIUM, SILENT) depending on
the amount of impurities in the air. The
sensors detect the impurities for efficient air
purification.
POLLEN mode operation
The unit will operate at HIGH* fan speed for
10 minutes, then will alternate between
MEDIUM and HIGH* for 20 minutes.
10 minutes: HIGH fan speed
20 minutes: MEDIUM fan speed
20 minutes: HIGH fan speed
* HIGH fan speed is an intermediate speed
between MEDIUM and MAX.
ION SHOWER Mode Button
ION SHOWER Mode Button
When pushing the ION SHOWER Mode button, the ION SHOWER operation
will be activated. (Direct start is available even when the unit is not turned on.)
The concentrated Plasmacluster Ions (ION SHOWER) will be generated in
the room like a shower for 15 minutes, repeating the airflow cycles between
strong and gentle. (The Plasmacluster Indicator Light repeats its colour cycles
between blue and green.), and effectively controls the airborne dust, pollen,
mold, and allergen.
• When the operation finishes, the unit will return to the prior operation.
• When pushing the ION SHOWER button while the ION SHOWER operation
mode is working, the unit will return to the prior operation.
Operation Mode Indicator Light
MAX operation
The unit will operate at a
fan speed of MAX.
MEDIUM operation
The unit will operate at a
fan speed of MEDIUM.
SILENT operation
The unit will operate quietly
using minimal air intake.
E-10

Main Unit Controls

• AUTO
• POLLEN
• SILENT
• MEDIUM
• MAX
Mode Selection Button
Power ON/OFF Button