GOK RV Serie Montage- Und Betriebsanleitung Seite 10

Screw connections
If connections leak, there is a danger of explosion, fire or suffocation!
Gas may escape if the product is turned.
Do not turn the product after it has been installed and the connections have been
tightened.
Tighten connections only when they are not pressurised.
Risk of injuries due to blown-out metal chips!
Metal chips may cause eye injuries.
Wear safety goggles!
Assembly notes
Malfunctions caused by residues! Proper functioning is not guaranteed.
• Visually check that there are no metal chips or other residues in the connections!
• It is important that metal chips or other residues are blown out!
Install with suitable tools, if required.
Regarding screw connections, use a second spanner to brace against the connection
nozzle. Do not use unsuitable tools, such as pliers.
Product damaged through incorrect installation direction
Proper functioning is not guaranteed.
• Observe the installation direction (marked on the product with an arrow
To install the connections, see CONNECTIONS in the assembly manual.
11. LPG SYSTEM LEAK TESTING
Risk of injuries or fire!
Serious burns to the skin or damage to property.
Do not use an open flame to check for leaks!
Leak testing before start-up
The LPG system should be checked for leaks with the help of a foaming agent in accordance
with EN 14291 (e.g. leak detector spray, part no. 02 601 00) under operating pressure) expert
or by a specialist company before start-up:
• the connections to LPG containers or LPG bottles,
• the pipe connections and all fitting connections which are under reservoir pressure, and
• the connections to the pressure regulator and the gas appliance connections.
10 / 24
Shut-off valve type RV and regulating valve
).
Artikel-Nr. 02 230 50 b