7. USER QUALIFICATION
This product may be installed only by qualified experts. These are personnel who are familiar
with setting up, installing, starting up, operating and maintaining this product.
Equipment and systems requiring supervision may be operated only by persons aged at least
18, who are physically capable and who have the necessary specialist knowledge or who
have been instructed by a competent person. Instruction at regular intervals, but at least once
per year, is recommended.
8. DESIGN
Shut-off valve type RV
Inlet connection
Outlet connection
Handwheel shut-off valve
9. CONNECTIONS
Inlet, optional
Inlet, optional
10. ASSEMBLY
Before assembly, check that the product is complete and has not suffered any damage
during transport. ASSEMBLY must be carried out by a specialised company.
See USER QUALIFICATION!
The specialised company and the operator must observe, comply with and understand all of
the following instructions in this assembly and operating manual. For the system to function
as intended, it must be installed professionally in compliance with the technical rules
applicable to the planning, construction and operation of the entire system.
Artikel-Nr. 02 230 50 b
Trading name and dimensions
acc. to standard
Compression fitting
• RVS 6, RVS 8, RVS 10 (G.15) (H.9)
• RVS 12, RVS 15, RVS 18 (G.22) (H.8)
Female thread, cylindrical (PS 4 bar LPG)
• IG Rp 1/4, Rp 3/8 (G.14) (H.7)
Nozzle RST
• Nozzle 8mm
Shut-off valve type RV and regulating valve
Handwheel regulating valve
Arrow for flow direction
Selection „–" und „+" on the handwheel
Regulating valve
Installation notes
Installation notes
9 / 24