Hazards And Safety Provisions During Servicing - Angelo Po 0S0Fa0 Handbuch

SAFETY

HAZARDS AND SAFETY PROVISIONS DURING SERVICING

During servicing, watch out for the following hazards and provide for the countermeasures indicat-
ed below:
► Source of hazard: Appliance mechanics
Hazard
Risk of cutting due
to sharp edges
► Source of hazard: Risk generated by materials/substances
Hazard
Unburned gas leak
Dangerous burnt
gas emissions
Dangerous burnt
gas emissions
► Source of hazard: Risks associated with the environment in which the appliance is used
Hazard
Presence of saturat-
ed steam
3386371_ut_GB
Where or in which situations
does the hazard occur?
When handling sheet-metal
parts
Where or in which situations
does the hazard occur?
Gas valve leak
Incorrect adjustment of the
gas system, incorrect injec-
tor and/or primary air ad-
justment
Blocked fl ue
Where or in which situations
does the hazard occur?
Condensation and dripping
on electrical and gas parts
Countermeasures
• Pay special care during
this activity
• Wear personal protective
equipment in accordance
with safety regulations
Countermeasures
• Periodic servicing of the
appliance gas system, to
be carried out only by ex-
pert technicians of an au-
thorised customer service
• Periodic servicing of the
appliance gas system, to
be carried out only by ex-
pert technicians of an au-
thorised customer service
• Periodic servicing of the
appliance gas system, to
be carried out only by ex-
pert technicians of an au-
thorised customer service
Countermeasures
• Periodic servicing of the
appliance gas and electric
system, to be carried out
only by expert technicians
of an authorised customer
service
ENGLISH
Safety device
None
Safety device
Safety device
None
9