Using The Remote Control; Installing The Batteries - Yamaha YAS-81 Bedienungsanleitung

■ Using the remote control

Use the remote control within 6 m (20') of the center system and point it toward the remote control sensor.
Notes
• Be careful not to spill liquid on the remote control.
• Be careful not to drop the remote control.
• Do not leave the remote control in a place that is:
– hot or humid, such as near a heater or in a bathroom
– extremely cold
– dusty

■ Installing the batteries

Notes
• If the effective operation distance of the remote control decreases considerably, replace the batteries with two new ones as soon as
possible.
• Do not use an old battery together with new one.
• Do not use different types of batteries (for example, alkaline and manganese) together. Their performance will vary, even if they are
similar in shape.
• If the batteries run out, immediately remove them from the remote control to prevent an explosion or acid leak.
• Dispose of batteries according to regional regulations.
• If a battery starts leaking, dispose of it immediately. Be careful not to let leaking battery acid come into contact with your skin or
clothing. Before inserting new batteries, wipe the compartment clean.
1
Take off the battery compartment cover.
2
Insert the 2 supplied batteries (AAA, R03, UM4), observing
the polarity markings (+ and –) on the inside of the battery
compartment.
3
Snap the battery compartment cover back into place.
GETTING STARTED
Within 6 m
(20')
7
En