Using Bluetooth™ Components - Yamaha YAS-81 Bedienungsanleitung

USING OPTIONAL EQUIPMENT
Using Bluetooth™ components
You can connect the Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) to the DOCK terminal
of the subwoofer/system control and enjoy the music contents stored in your Bluetooth component (such as a portable
music player or computer equipped with a Bluetooth transmitter, etc.) without wiring between the system and the
Bluetooth component. You need to perform "pairing" of the connected Yamaha Bluetooth wireless audio receiver and
your Bluetooth component in advance.
■ Controls and functions for Bluetooth components
DOCK
Set the input to DOCK.
BLUETOOTH ON/OFF
• Start or cancel the pairing.
• Connect or disconnect a
Bluetooth component.
■ Pairing the Yamaha Bluetooth™ wireless audio receiver and
your Bluetooth™ component
Pairing must be performed before using a Bluetooth component with the Yamaha Bluetooth wireless audio receiver
connected to the system for the first time or if the registered pairing data has been deleted. "Pairing" refers to the
operation of registering a Bluetooth component for Bluetooth communications.
To ensure security, a time limit of 8 minutes is set for the pairing operation. Please read and fully understand all the
instructions before starting.
1
Connect the Yamaha Bluetooth wireless audio receiver to the DOCK terminal of the subwoofer/
system control. (☞ P. 14)
2
Press DOCK to set the input to DOCK.
3
Turn on the Bluetooth component you want to pair with, and then enter pairing mode.
Refer to the instruction manual of your Bluetooth component for details.
30
En
Playback control buttons
Control the playback of a Bluetooth
component.
p: Play
e: Pause
s: Stop
b/a:
Skip backward/forward