VEVOR RP17407 Originalanleitung Seite 7

Verify that grinding accessories that are used with this tools are rated at or
•
above the tool's speed rating (7500RPM).
Failure to properly match the accessory to the tool could result in serious
•
personal injury.
Always ensure that the accessories are rated/ designed for use with the
•
tool.
Ensure that the accessories are correctly and securely fastened before
•
connecting the tool to the air supply.
Locate the compressor in a well-ventilated area. For cooling, at a minimum
•
of 12"(31cm) away from the nearest wall.
Protect the air hose and the power cord from damage and puncture.
•
Inspect them for weak or worn spots every week,and replace them if
necessary.
Always wear hearing protection when using the air compressor. Failure to
•
do so may result in hearing loss.
Do not carry the compressor while it is running.
•
Do not operate the compressor if it is not in a stable position.
•
Do not operate the compressor on a rooftop or in an elevated position
•
that could allow the unit to fall or be tipped over.
Always replace a damaged gauge before operating the unit again.
•
CAUTION!
Potential hazard that may result in moderate injury or damage to equipment.
Keep proper footing at all times in order to ensure correct balance.
•
Do not wear watches, rings, bracelets, or loose clothing when using any
•
air tool.
For optimal safety and tool performance, inspect the tool daily in order to
•
ensure free movement of the trigger, safety mechanisms, and springs.
Keep the work area clean. A cluttered or dirty workbench may lead to an
•
accident. Floors should be kept clear.
• This tool is not a toy. Use it with caution.
Use the tool in a well-ventilated area.
•
Verity that the tool has stopped before putting it down after use.
•
Handling and storage of oil: Use with adequate ventilation. Avoid contact
•