VEVOR RP17407 Originalanleitung Seite 13

Rotate the speed control knob on the right side of the tool during forward
rotation to control the speed of the air flow as required.
5. After using the tool, disconnect the air hose from the tool.
WARNING!
Potential hazard that will result in serious injury or loss of life.
Hold the tool firmly with hands.

Do not apply additional or excessive force to the tool when working.

Do not allow the tool to run free for an extended period of time. Doing

so will shorten the life of the tool.
Verify that the air supply is clean and air pressure does not exceed

90psi (6.3bar) while operating the tool. If the air pressure is too high or
unclean, it will shorten the life of the tool. Failure to comply could result
in serious injury or loss of life.
WARNING!
Potential hazard that will result in serious injury or loss of life.
Disconnect the tool from the air supply before changing accessories,

servicing, or performing maintenance.
Only use the tool after replacing or repairing the damaged parts or

accessories.
Use only recommended and properly rated replacement parts and

accessories. Failure to comply will lead to serious
injury or loss of life.

Repairs must be performed by a qualified service technician.

Maintenance
required
General
inspection-free
movement
MAINTENANCE
Description
Trigger, spring,
safety
mechanism
Maximum service interval
Tools or
materials
Each use or every
required
2 hrs
None
As
Monthly
needed