telekom behnke myintercom Plus Anleitung Seite 69

Instructions myintercom Plus IP video door intercom
GB
Configurations and Set-up
User name and password will automat- Use this screen to assign a door bell to a user:
" for easier
ically be filled in. Enter a "Name
user identification at a later stage. It is not
" without entering a name.
possible to "Save
Please write down the access information
provided ("user name" and "password"). You
will need this information for app configuration
of the video door intercom. See the next chapter
"Adding video door intercom devices" to learn
how to do so. Use the door bell to determine
the bell button that this user will be assigned
to. The user will receive a push notification,
as soon as the corresponding bell button is
pressed. You may assign exactly one bell button
to one user. Consequently, the configuration
for every bell button is identical to configuring
an individual myintercom device. In case a user
wants to be notified for more than one bell
button being pressed, you need to assign mul-
tiple users and assign multiple door intercoms
to the user's device (one door intercom per bell
button). Tap"Save " to add the user to the
" will
video door intercom. Tapping "Delete
delete the user selected from the video door
intercom. A deleted user no longer has access
"
to the video door intercom. Tap "Change
to change the user's password. A new random
password will be generated and saved in the
camera. Then the user enters this new password
into their smartphone or tablet PC. Tap "Send
" , to send the currently displayed
via e-mail
user data via e-mail.
www.behnke-online.com 69