telekom behnke myintercom Plus Anleitung Seite 64

Instructions myintercom Plus IP video door intercom
GB
Card reader
Now, you may remove the additional master's
card from the card reader. The display will turn off.
Please note: A transponder that is already
assigned a memory position and grants access to
its user cannot be used as the additional master's
card. In this case, the system will automatically
move to the transponder's memory position.
How to delete the additional master's card
It is impossible to delete the initial master's card.
To delete the additional master's card, you need
the initial master's card.
Hold the initial master's card to the card reader.
The system will go through all the 190 ("
memory positions. Then the display will show the
following:
Remove the initial master's card from the card
reader. For approx. 3 seconds, the display will
remain lit, and then the display will flash for
about 6 seconds.
64
Hold the initial master's card to the card reader.
The additional master's card will be deleted,
and the decimal point to the right will turn off.
Now, you may remove the initial master's card
from the card reader. The display will turn off.
")
1.9
www.behnke-online.com